JY-5204 Rubber Mold Cleaning Agent (Mold Washing Water)

Mold Washing Water (Rubber Mold Cleaning Agent), Deguming Agent (Plastic Film Removing Agent), Silicone Mold Washing Water

Product Research and Development Background:

In industrial production, it is always a headache to remove vulcanized dirt from tools, due to the vulcanized product process needs to be completed at high temperature for a long time, resulting in some of the oil and chemical components in the rubber remaining in the mold to form stubborn dirt after high temperature coking!

In order to remove the stubborn dirt residue in the mold, the cleaning force of the general mold cleaning agent is often insufficient, and the metal brush and sandblasting must be matched to remove the stubborn dirt on the mold during the cleaning process, thus causing serious damage to the mold surface.

For this, our company developed a new generation of super high-temperature mold special cleaning agent-fast mold washing water, which contains a variety of special surface promoter formulations. It only needs to spray a small amount of stock solution or diluent on the mold surface, without any auxiliary tools, and can completely soften and remove stubborn dirt on the mold surface in a very short time, thus reducing the mold maintenance cost, mold opening cost, time and personnel cost for enterprises, improve the efficiency of the treatment mold, economic and convenient and practical, a variety of mold dirt surface treatment preferred program!

Product Application Scope:

is used to clean oil, gas residue, plastic residue, inorganic salt, hand sweat, dust and other dirt on the surface of mold steel and rubber mold. Mold anti-rust film and stains, suitable for deep pit molds and surfaces that need cleaning.

is also suitable for cleaning the dirt on the mold from the vulcanized residues of silica gel, natural rubber, butyl rubber, butyl rubber, ternary rubber, ethylene-propylene rubber and other materials.

can clean all kinds of machinery, molds, tools, parts, fixtures, steel mesh, chains and other materials can remove oil stains and stains and volatilize clean, has a strong cleaning ability, and does not hurt the workpiece, so that the cleaned material has a new look.

Product Advantages:

● It does not contain controlled substances such as heavy metals, phosphorus, nitrite, etc. There are no harmful substances that need special labeling in the composition. It can be completely biodegradable, improve working conditions and prevent environmental pollution.

● It has good cleaning ability for grease and dirt, and its degreasing and decontamination cleaning ability is super strong. Dissolve completely, anti-static, easy to rinse; and at the same time can effectively protect the surface of the material being cleaned from erosion.

● Green environmental protection, general, efficient, safe and economical.

● rubber mold cleaning agent volatilization speed, the effect is obvious.

Usage:

Cleaning Agent → Cleaning Agent → Rinsing → Rinsing → Drying

1. The cleaning method can be ultrasonic cleaning and electrolytic mold cleaning machine.

2, direct stock solution cleaning (or use with water according to the situation), without heating, cleaning agent can be recycled.

3, room temperature cleaning, no heating, cleaning time 3-10 minutes.

Physical parameters:

product packaging, storage and transportation:

plastic barrel packaging: 25KG/barrel, non-dangerous goods are easy to store and transport;

has a storage period of two years and cannot be stored in the open air to prevent sun and rain.

Unused cleaning agent must tighten the barrel cover to avoid mixing moisture and impurities.

Precautions:

is added in small quantities many times according to the cleaning effect and production volume. Keep the concentration uniform and mix the stock solution according to the cleaning effect. The cleaning effect of

is obviously decreased, the surface oil, dirt and impurities are too much, and the working fluid must be grooved again when it is aging.

Do not make this product contact with the eyes, if accidentally splashed into the eyes, can lift the eyelid, rinse with flowing water or saline; Do not swallow this product, if accidentally swallowed, induce vomiting, keep the rest state, timely medical care.

To prevent excessive degreasing of the skin, please wear chemical-resistant gloves during operation.